Company News

Kitchen Decoration Design-Kitchen Safety Precautions

By 2020-01-09 No Comments

1. Material selection
The kitchen is an area prone to moisture, so the surface decoration materials should be selected from materials with good water resistance, and the floor materials should also be non-slip and water-proof. It is best to choose materials that are easy to clean, prevent moisture and heat. At the same time, the kitchen is also an open flame zone, so the fire resistance of the material is also very important; especially the fire resistance of the material should be paid attention to around the stove.
2. Cabinet design
The ceiling of the kitchen often hits the forehead when in use, so before installing the ceiling, you must first measure the height of the hanging cabinet and the height of the hanger, and actually design the installation height according to the height of the family, so as not to use the tall head. At the same time, the width of the ceiling cabinet is designed to be narrower than the workbench.
3.Kitchen countertop
Sometimes, the kitchen counter or cabinet corners are designed to look good. Although they look good, they are easy to be bruised or bruised in the actual operation process. Therefore, it’s better to round the corners to reduce the possibility of bruise.
4, stove
The cooktop should be designed in the center of the kitchen countertop, and a worktop surface should be reserved beside the cooktop to facilitate safe and timely access to the soup pot to avoid burns.
5, kitchen door
The design of the kitchen door is actually very particular. Traditional kitchen doors are opened inside. This kind of design is very easy to open the door that hits the door to help, so it is generally designed to open or slide the door now, which is more secure.
6, range hood
Setting the range hood must be set according to the height of the user. The best use height is slightly higher than the head, so that it can avoid collision when using, and it is convenient to use. Generally, the distance between the cooker hood and the cooktop should not exceed 60, otherwise it will not reach
7. Circuit design
As the frequency of use of the kitchen increases, more and more appliances will be used, so the safety of the kitchen circuit is also important. At the beginning of the renovation, we must pay attention to the problem of reserved sockets.
8. Refrigerator
The refrigerator must be placed in the kitchen not too close to the stove, because the stove often generates heat from pollution sources, which will affect the temperature of the refrigerator. At the same time, the refrigerator should not be too close to the water tank to avoid leakage of water caused by the refrigerator.
9. Ventilation settings
Kitchen decoration must be well ventilated, especially for some more closed rooms. After using the kitchen, be sure to pay attention to opening the window for ventilation, and let the remaining gas in the kitchen circulate through the ventilation to ensure its safety.
10. Gas stove
Pay attention to setting the valve in front of the stove when renovating. Close the valve in front of the stove when you are done with gas. Always check the safety and air leakage situation. In case of sudden gas outages, all gas switches and stove front valves should be closed in time